Teknik Kimya Integral, Elostomer, RIM Mold Release Agents for Polyurethane Systems have excellent mold release power and minimum mold pollution for Integral, Elostomer, RIM systems used in the automotive and furniture industries. Available in ready-to-use, concentrate-ready-to-use and dilutable versions. They are environmentally friendly mold release agents that are formulated as water and solvent based, do not contain toxic materials.
Economic.
has minimum consumption.
Provides minimum mold pollution.
has excellent mold release feature.
Creates a homogeneous surface.
Works in wide mold temperatures and all mold types.
Armaliz 2600 Series Release Agents
It is water-based formulated and gives good results in wide mold temperatures and all mold types. It can be used safely without ignition during storage, transportation and usage stages. Concentrated versions can be used by diluting with ionized water.
Sintaliz 1000 Series Mold Release Agents
They are specially formulated for elastomer systems. Ready-to-use and concentrated-ready-to-use versions are available. Release agents formulated with Class I A1 type solvents are preferred for their fast drying properties, while Class II A2 and Class III A3 solvent containing release agents are preferred due to their high flash points.
Sintaliz 5000 Series Mold Release Agents
They are formulated in different solvents according to the needs. Our products, which are formulated in different degrees of opacity, have the property of minimal mold contamination. Release agents formulated with Class I A1 type solvents are preferred for their fast drying properties, while Class II A2 and Class III A3 solvent containing release agents are preferred due to their high flash points.
English
